Wendelin Exanalytics Libre

WENDELIN combines Scikit Learn machine learning and NEO distributed storage for out-of-core data analytics in python

Table of Contents

Overview

  • In this tutorial we will learn how to:
    • Install and configure Wendelin on a webrunner.
    • Ingest data into Wendelin using Fluentd. (open source data collector used to ingest data to Wendelin) Fluentd Website.
    • Manipulate data in Wendelin using Jupyter Notebook. Jupyter Website.
    • Present data in Wendelin on a web site using Renderjs and jIO javascript libraries.

1. Getting Wendelin on a Webrunner

Request a Webrunner

  • For this tutorial, you will use services provided by vifib.com.
  • On Vifib request a Webrunner:
  • Go to services.
  • Click on Add button.

Request a Webrunner

  • Choose Webrunner software.
  • On the next screen choose the latest version.
  • Choose a name for your Webrunner and click Proceed.
  • Wait for connection parameters to appear and Monitoring Status turn green.

Request a Webrunner

  • You will need three connection parameters: url, init-user and init-password.
  • Click on url parameter and use the user and password parameters for authentication.

Install Wendelin

  • Click Open Softwere Release.
  • Open Slapos > Sofrware > Wendelin and click Open Software.
  • You should now see text file with first line [buildout]. Click Green arrow to start compilation.

Install Wendelin

  • Follow the log on the screen.
  • Compilation takes several hours.
  • IF compilation fails, click the green arrow again. It might be needed to restart the compilation few times.
  • In the end at least Building state should be completed.
 

Connection Information

  • When installation is complete, switch to the Services and click Connection Information tab.
  • In slappart0 you should see something like in the screenshot above. If not, click the green arrow again, wait until finishes and refresh.
  • Note down family-default-v6, inituser-login and inituser-password parameters.
 

Request frontend

  • Go back to Vifib screen of your Webrunner service and scroll down to find parameters Custom Frontend Backend URL and Type.
  • For Custom Frontend Backend url enter family_default_v6 parameter, and for the Custom Frontend Backend Type enter Zope and click Save.
  • Wait until custom-frontend-url appears under connectin parameters and click on it.

Login

Wendelin-ERP5 Login
  • Click on Zope management interface.
  • Login using username and password, that you noted down.
  • go to: http://softinstxxxx.host.vifib.net/erp5.

Configure Site

  • Go to: My Favorites > Configure your Site .
  • Your ERP5 instance is now ready, but it has only very generic core library. This core can be specialized through different business templates for different purposes.
  • This can be done manually, installing individual business templates that provide your ERP5 instance with utilities that you need.
  • That can be done in My Favorites > Manage Business Templates
  • But Wendelin uses a lot of different business templates and that would be a lot of work, so configurator is provided that makes that work for you and installs just the business templates that are important for Wendelin.

Install Configuration

  • Select Wendelin Configuration.
  • IF there is no Wendelin Configurator, you have to install it:
    • Go to My Favourites > Manage Business Templates .
    • Click on Import/Export button (blue and red arrows).
    • Select Exchange > Install Business Templates from Repositories .
    • Check box before erp5_wendelin_configurator business template and click Install Business Templates from Repositories.

Install Configuration

  • Make sure that all the boxes are checked.
  • Click Set of data Notebook module and on the next screen Install .

Wait

  • Installation may take a few minutes
  • Once down, click "Start using your ERP5 System"
  • Login again.

Main Interface

Wendelin ERP5 - All set
  • Your instance is now ready to use
  • The start screen shows a list of modules (data-types) directly accessible.
  • You can also access them through Modules selection tab at the top of the screen.
  • Probably you noticed that after configuration there are a lot more of them.
  • Modules can be contain anything from Persons, Organizations to Data Streams.
  • Modules prefixed with Portal are not displayed (e.g. portal ingestion policies)

2. Simulate Sensor and ingest data via Fluentd

Create Ingestion Policy

Wendelin-ERP5 Ingestion Policies
  • Now we will setup Wendelin to receive data from fluentd.
  • Goto: http://softinstxxxx.host.vifib.net/erp5/portal_ingestion_policies/
  • Ingestion policy is security Setting to prevent arbitrary stream from being sent
  • Currently fluentd and Wendelin are setup to receive streams of data
  • A data stream is a file, created by ingestion policy, to which data is continually appended

Fast Input

Wendelin-ERP5 Create Ingestion Policy
  • Hit the "Green Runner" to create new Ingestion Policy
  • Enter "pydata" as reference name and "Pydata" as title and click Create Ingestion Policy .
  • This creates a new ingestion policy.
  • The ingestion policy includes default scripts to be called on incoming data.
  • If you want to modify data handling, you could now write your own script.

Wendelin in Production

Wendelin | Windpark
  • First Wendelin prototype in production was used to monitor wind turbines.
  • Wendelin is used to collect data and manage wind parks.
  • Allowed to use Machine Learning for failure prediction, structural health monitoring.

Wendelin in Production

Wendelin | Wind Turbine
  • Each wind turbine equipped with multiple sensors per blade and PC collecting sensor data
  • Each PC including fluentd for ingesting into Wendelin (network availability!)

Basic FluentD

Wendelin | Basic FluentD Flowchart
  • FluentD is open source unified data collector
  • Has a source and destination, generic, easy to extend
  • Can handle data collection even under poor network conditions
  • More info: FluentD Website

Complex FluentD

Wendelin | Complex FluentD Flowchart
  • Setup of FluentD can be much more complex.
  • In Wendelin production, every turbine has its own FluentD.

Record Audio

Wendelin-ERP5 Audio Recorder

Webrunner using fluentD

Wendelin-ERP5 Monitor Webrunner
  • For this part of tutorial you will need a webrunner using Fluentd:
    • Request another webrunner for Fluentd.
    • Install the same way, just now choose slapos > software > fluentd.
    • When installation completes, go to Editor (You dont need to request frontend.)

Upload to Monitor

Wendelin-ERP5 Monitor Webrunner File Upload
  • Go to the Editor, click "This Project"
  • Make a folder for this tutorial
  • Left click and select upload file
  • Upload your .wav file.

Forward File to fluentD

Wendelin-ERP5 Webrunner FluentD Configuration
  • In the Editor, open folder that you created.
  • Create a new file, name it YOUR_NAME.cfg
  • Code on next slide (please copy&paste)
  • We are now creating a configuration file to pass to fluentd
  • The file contains all parameters for fluentD regarding data source and destination
  • Normally this is set upfront, but for the tutorial we hardcode

gist)">FluentD Configuration File (Gist)

<source>
    @type bin
    format none
    path /srv/slapgrid/slappart9/srv/runner/PUT_YOUR_WAV_HERE/!!YOURNAME!!*.wav
    pos_file /srv/slapgrid/slappart9/srv/runner/!!YOURNAMEGOESHERE!!.pos
    enable_watch_timer false
    read_from_head true
    tag pydata
</source>
<match pydata>
    @type wendelin
    @id wendelin_out
    streamtool_uri http://!!URL_TO_YOUR_ZOPE!!/erp5/portal_ingestion_policies/pydata
    user zope
    password insecure
    buffer_type memory
    flush_interval 1s
    disable_retry_limit true
</match>
  • Copy this script to new file that you created and edit paths to the vaw file and to the pos file, uri to your wendelin and username and password.
  • Make sure all the paths are correct.
  • Fluentd configuration file has two parts. Input part, represented by the source tag and output part represented by the match tag.
  • Each part first define which plugin shall fluentd use with @type variable.
  • Source tag then define path to file that you wish to upload, and path for .pos file with @file and @pos_file variables.
  • .pos file is created by fluentd and is used for tracking position in a file during ingestion.
  • @tag variable in the source part should match the match tag
  • Output part is a match tag. It must match a tag given to the data in the source part. It contains uri to your ingestion policy, and username and password for your Wendelin
  • For more information on writing Fluentd configuration files check out: Fluentd configuration documentation.

Save and send from Terminal

Wendelin-ERP5 Webrunner FluentD File Transfer
  • Switch to the terminal and run fluentd with:
  • software/"YOUR SOFT NUMBER"/bin/fluentd -c path/to/YOUR_NAME.cfg
  • To run fluents with your configuration including what file to send to Wendelin.
  • This will create new Data Stream in your Wendelin instance, and send data to it.
  • Notice that Fluentd is running until you interrupt it and waiting for new input.
  • In our case, we had just a small .vaw file, but we could also have continuous stream of data from the sensor and fluentd would be continuously appending it to Data Stream.

Check created Data Stream

Wendelin-ERP5 - Verify File was received
  • Head back to Wendelin/ERP5.
  • In the Data Stream Module, check the file size of the pydata stream.
  • It should show a file size larger than 0.

3. Work with Ingested Data

Out-of-Core

Wendelin Out of Core Computing
  • Wendelin.Core enables computation beyond limits of existing RAM
  • We have integrated Wendelin and Wendelin.Core With Jupyter
  • In Jupyter we can use ERP5 Kernel (out-of-core compliant) vs. Python 2 Kernel (default Jupyter)

Enable Data Notebook

  • Head to My Favourites > Preferences.
  • Click Default System Preferences and open Data Notebook tag.
  • Check the box to enable Data Notebook and click the save icon.

Head to Jupyter

  • Go back to connection information in webrunner and open jupyter-url.
  • For password we have to find a partition, where Jupyter is installed. For that go to services>process tab, check in which slappart is Jupyter (e.g slappart 7), then you will find the password in instance/slappart7/knowledge0.cfg
  • Authenticate.
  • Start a new ERP5 Notebook. This will make sure you use the ERP5 Kernel .
  • Note that to open jupyter-url you need IPv6 access. If you don't have it, you have to request a new frontend on vifib with jupyter-url as backend url, and backend type notebook, and then click on secure access url to access it.
  • The Python 2 Kernel is the default Jupyter Kernel
  • Using Python 2 will disregard Wendelin and Wendelin.Core, so it's basic Jupyter.
  • Using ERP5 Kernel will use Wendelin.core in the background.
  • To make good use of it, all code written should be Out-of-core "compatible"
  • For example you should not just load a large file into memory (see below).

Learn ERP5 Kernel

  • Passing login/password will authenticate Juypter with Wendelin/ERP5
  • The reference you set will store your notebook in the Date Notebook Module

Getting Started

  • Authenticate, and set arbitrary reference for your notebook.
  • This is always the first step when you start a new Notebook with ERP5 Kernel.
  • It makes sure that you are connected to ERP5/Wendelin instance any you can work with objects on it.
  • It also creates Data Notebook object on your ERP5/Wendelin instance.
  • You can go to Data Notebook Module and see that your Data Notebook object is now saved there.

Accessing Objects

  • Type context, this will give you the Wendelin/ERP5 Object.
  • Type context.data_stream_module["1"] to get your uploaded sound file.
  • Accessing data works the same ways throughout [IPv6]:30002/erp5/[module_name]/[id].
  • All modules you see on the Wendelin/ERP5 start page can be accessed like this.
  • Once you have an object you can manipulate it.
  • Note that accessing a file by internal id (1) is only one way.
  • The standard way would be using the reference of the respective object, which will also allow to user portal_catalog to query.

Import libraries

  • Import necessary libs.

Accessing Data Itself

  • Try to get the length of the file using getData and via iterate
  • Note then when using ERP5 kernel all manipulations should be "Big Data Aware"
  • Just loading a file via getData() works for small files, but will break with volume
  • It's important to understand that manipulations outside of Wendelin.Core need to be Big Data "compatible"
  • Internally Wendelin.Core will run all manipulations "context-aware"
  • An alternative way to work would be to create your scripts inside Wendelin/ERP5 and call them from Juypter
  • Scripts/Manipulations are stored in Data Operations Module

Compute Fourier

  • Proceed to fetch data using getData for now
  • Extract one channel, save it back to Wendelin and compute FFT
  • We can call methods from Wendelin/ERP5.
  • Wendelin/ERP5 has a system of method acquistion. Every module can come with its own module specific methods and method names are always context specific ([object_name]_[method_name] ). Base methods on the other hand are core methods of Wendelin/ERP5 and applicable to more than one object.

Display Fourier

  • Check the rendered Fourier graphs of your recorded sound file

Save Image

  • Save the image back to Wendelin/ERP5.
  • Close figure with plt.close() function, otherwise it will show on all outputs

Create BigFile Reader

  • Add a new class BigFileReader
  • Allows to pass out-of-core objects

Rerun using Big File Reader

  • Rerun using the Big File Reader
  • Now one more step is out of core compliant
  • Verify graphs render the same
  • We are now showing how to step by step convert our code to being Out-of-Core compatible
  • This will only be possible for code we write ourselves
  • Whenever we have to rely on 3rd party libraries, there is no guarantee that data will be handled in the correct way. The only option to be truly Out-of-Core is to either make sure the 3rd party methods used are compatible and fixing them accordingly/committing back or to reimplement a 3rd party library completely.

Check the graphs

  • Verify graphs render the same
  • Don't forget to close the figure.

Redraw from Wendelin

  • This is the way to redraw the plot directly from data stored in Wendelin/ERP5
  • Imidiatelly after you create content, though, it doesn't work. You must wait for the object to be catalogued.

Verify Images are Stored

  • Head back to Wendelin/ERP5
  • Go to Image module and verify your stored images are there.

Verify Data Arrays are Stored

  • Switch to the Data Array module
  • Verify all computed files are there.

4. Visualize, Display computed data

Running Web Sites from Wendelin

Wendelin-ERP5 - Start Page
  • Last step is to display results in a web app
  • Head back to main section in Wendelin/ERP5
  • Go to Website Module
  • One of the modules in erp5 is Web Site Module.
  • We will use it to create simple Web Site for presentation of our result.

WebSite Module

Wendelin-ERP5 - Website Module
  • Website Module contains websites
  • Open renderjs_runner - ERP5 gadget interface
  • Front end components are written with two frameworks, jIO and renderJS
  • jIO (Gitlab) is used to access documents across different storages
  • Storages include: Wendelin, ERP5, Dropbox, webDav, AWS, ...
  • jIO includes querying, offline support, synchronization
  • renderJS (Gitlab) allows to build apps from reusable components
  • Both jIO/renderJS are asynchronous using promises

Renderjs Runner

  • Parameters for website module
  • see ERP5 Application Launcher - base gadget
  • Open new tab: http://softinstxxxx/erp5/web_site_module/renderjs_runner/
  • It is important not to forget / at the end of the url, otherwise link will not work!
  • Apps from gadgets are built as a tree structure, the application launcher is the top gadget
  • All other gadgets are child gadgets of this one
  • RenderJS allows to publish/aquire methods from other gadget to keep functionality encapsulated

Renderjs Web App

  • ERP5 interface as responsive application
  • We will now create an application like this to display our data

Clone Website

  • Go back to renderjs_runner website
  • Clone the website

Rename Website

  • Change id to pydata_runner
  • Change name to PyData Runner
  • Save

Publish Website

  • Select action Publish and publish the site
  • This changes object state from embedded to published
  • Try to access: http://softinstxxxx/erp5/web_site_module/pydata_runner/
  • Every object in ERP5 has a state (For example draft, published,...).
  • Workflows are used to change the state of objects.
  • A workflow in this case is to publish a webpage, which means changing its status from Embedded to Published.
  • Workflows (among other properties) can be security restricted. For example, everybody can see Web Site in published state, but only its creator can see it while it is still in draft state.
  • This concept applies to all documents in ERP5.

Layout Properties

  • Change to Tab "Layout Properties tab"
  • Update Front Page Gadget to pydata
  • Refresh your app (disable cache), it will be broken, as pydata page gadget doesn't exist
  • One advantage working with an aync promise-chain based framework like renderJS is the ability to capture errors
  • It is possible to capture errors on client side, send report to ERP5 (stack-trace, browser) and not fail the app
  • Much more fine-grainded control, we currently just dump to screen/console

Web Page Module

  • Now we will create pydata page gadgets. Like with website we will clone existing default gadgets and modify them.
  • Change to web page module
  • Search for reference %worklist%
  • The web page module includes html, js and css files used to build the frontend UI
  • The usual way of working with static files is to clone a file, rename its reference and publish it alive (still editable)

Clone Worklist gadgets

  • Open both files in new tabs, clone, change title.
  • Replace "worklist" in references and titles with "pydata", save and publish alive.
  • When published alive, object are still editable.
  • We will now edit both files to display our graph.

Pydata Gadget HTML

  • Go to edit tab on html gadget.
  • Copy and paste this script to the contents of the gadget.
  • This is a default gadget setup with some HTML.
  • Gadgets should be self containable so they always include all dependencies
  • RenderJS is using a custom version of RSVP for promises (we can cancel promises)
  • The global gadget includes promisified event binding (single, infinite event listener)
  • We are using RenderJS and jIO javascript libraries.
  • More info:
  • This is a default gadget setup with some HTML.
  • Gadgets should be self containable so they always include all dependencies
  • RenderJS is using a custom version of RSVP for promises (we can cancel promises)
  • The global gadget includes promisified event binding (single, infinite event listener)

Pydata Gadget JS

  • Same with javascript gadget.
  • Copy and paste this script to the javascript gadget (in the edit tab).

Save, refresh web app

  • Once you saved your files, go back to the web app and refresh
  • You should now have a blank page with header set correctly
  • This are just default template gadgets.
  • We will now update our gadgets to fetch our graph and display it

Update Pydata Gadget HTML

  • Update html gadget with this script.
  • Took from existing project, HTML was created to fit a responsive grid of graphs
  • Added JS library for multidimensional arrays: NDArray
  • Added JS libarary for displaying graphs: Dygraph

Pydata Gadget JS (1)

  • Update js gadget with this script (screenshots on this and next slides).
  • First we only defined options for the Dygraph plugin
  • In production system these are either set as defaults or stored along with respective data

Pydata Gadget JS (2)

  • Add methods outside of the promise chain
  • Simplified (removed actual creation of date objects)

Pydata Gadget JS (3)

  • Edit url variable for your instance and for id of your spectrum2 Data Array!
  • "ready" triggered once gadget is loaded
  • define gadget specific parameters
  • "render" called by parent gadget or automatically
  • we hardcode url parameter, by default it would be URL based

Pydata Gadget JS (4)

  • Orchestrated process starting with a cancellable promise queue
  • First step requesting the full file (NOT OUT-OF-CORE compliant - we load the whole file)
  • Return file converted into ndarray
  • Convert data into graph compatible format, store onto gadget
  • "declareService" triggered once UI is built
  • Graph will be rendered there.

Refresh Web Application

  • Example computes client-side as project requires to work offline "in the field"

Summary: What did we do?

Wendelin-ERP5 - Hyperconvergence
  • We installed Wendelin on our KVM and configured it.
  • We ingested data with Fluentd.
  • We work with data using Jupyter Notebook.
  • We presented data in Wendelin using RenderJS and jIO javascript libraries.